banner



Home  ›  How To Repair Woven Plastic Outdoor Furniture

How To Repair Woven Plastic Outdoor Furniture

Written By Sunday, 19 June 2022 Add Comment Edit

Download Article

Download Article

Rattan garden piece of furniture adds a simple merely elegant, woven touch to your outdoor living space. While this furniture is pretty low-maintenance, the woven material can unravel or suspension over time. Not to worry—both wooden and synthetic rattan are like shooting fish in a barrel to repair, and both can be stock-still in the same way. If your furniture only has a few loose ends or wrappings, refer to the first method in this guide. If some sections of your piece of furniture need a little actress TLC, skip ahead to the second method.

  1. i

    Castor off any clay on the furniture's surface before making repairs. Grab a bristled brush and clean off any dirty sections of your piece of furniture. Focus especially on any sections you'll exist fixing upwardly, so your repairs look clean and seamless.[1]

  2. 2

    Wipe down real, wooden rattan article of furniture with dish soap and water. Stir 1⁄4   c (59 mL) of dishwashing soap with 1 Usa gal (three.viii L) of water.[two] Then, dip a soft rag into the sudsy mixture and wipe downwardly the entire surface of the furniture. Clean any hard-to-reach crevices with a toothbrush.[3]

    • Don't get your rag sopping wet—if you get your rattan furniture also wet, you might damage it.

    Advertisement

  3. three

    Tighten loose rattan pieces with a screwdriver to go rid of holes. Sometimes, loose rattan weaving looks warped, creating "holes" in your furniture. Locate the specific strands of rattan material that look loose and warped. Then, slide the finish of a flathead screwdriver beneath the end of the strand. Elevator up the strands with the screwdriver—this volition tighten the material, completely removing the "hole."[4]

  4. 4

    Secure whatsoever loose ends back into place with super glue. After a lot of use and time outside, rattan ends tin can expect a little worse for wear. Not to worry—only squeeze a dot of super glue forth each end, and tuck them back into the weaving. So, wait for the glue to dry out and seal before using the furniture once again.

    • Check the glue characterization as well—certain types of glue might need more than fourth dimension to dry and cure earlier you lot sit down on or utilize the piece of furniture again.

  5. 5

    Weave any loose wrappings back into place and glue them downward. Rattan furniture stays in identify via tight "wrappings" forth the edges of the furniture. If one of these wrappings gets loose, it could through the whole weave pattern out of whack. Pull these loose sections taut and wrap them back around the side of your furniture. Then, secure them in place with super mucilage.[v]

    6. Advertising

  1. 1

    Cut away any cleaved rattan strands. Have a close wait at your rattan furniture and pinpoint where the broken or damaged strands are. Then, take hold of a pair of pliers or scissors and make ii cuts—one on either finish of the damaged rattan strand. Cut out nearly of the strand, leaving simply 1⁄two  in (1.3 cm) of slack on either side of the weaving.[half-dozen]

  2. 2

    Measure out and cutting a new replacement strand for your article of furniture. Identify the new rattan strand next to the rattan strand that you but cut out and removed. And then, unwind and cut a length of new rattan that's a fiddling longer than the damaged section, and then you accept plenty of material to work with in your repairs.[7]

    • If the new department is too long, you can always trim it downwards after.
    • Yous can purchase replacement rattan textile online, or at specialty stores.

  3. three

    Soak the replacement rattan strands in water for xxx minutes. Fill a large bowl with water and submerge your rattan strands. Set a timer for 30 minutes—this makes the rattan material overnice and flexible, and makes it a lot easier to piece of work with during your repairs. Earlier continuing with the repairs, blot away any excess water from the rattan cloth.

    • The h2o doesn't accept to be a specific temperature! Any type of water helps brand the material more pliable.

  4. 4

    Apply a dot of super glue along ane end of the rattan strand. Spread the mucilage forth the bottom stop of the material, then it volition hold in place.[8]

    • Waterproof super glue works best for outdoor furniture.

  5. 5

    Press the glued end of the rattan strand in place for 5 minutes. Notice the trimmed stop of rattan, where y'all cut away the damaged section of material. Press the glued section of rattan on top of this section, letting the mucilage dry out and harden for five minutes.[9]

    • Double-bank check the super gum tube for an exact drying recommendation.

  6. vi

    Weave the rest of the new strand into your piece of furniture. Grab the loose end of the rattan cloth, threading it over and nether the perpendicular sections of rattan along your piece of furniture. Proceed weaving the rattan strand until you've completely filled in the broken section.[10]

  7. 7

    Cut off any backlog material at the finish of the weave. Pull on the replacement rattan strand so information technology's completely taut. Line up the excess strand so the end stretches to the center of the next perpendicular rattan section. Then, trim off whatsoever actress material with your pliers or pair of scissors.[11]

  8. 8

    Utilize a dot of glue and constrict the strand beneath the neighboring rattan material. Squeeze a dot of super glue onto the other finish of the new strand. Then, tuck the rattan below the perpendicular department of material.[12]

    • Y'all don't demand to concord the strand in place—it'll stick to the material on its ain.

  9. 9

    Wait thirty minutes for the mucilage to harden before using the article of furniture. To be condom, read over the characterization on your super glue to see how much time it needs to harden. Don't sit on or use the furniture until the glue has enough time to dry out, seal, and cure completely.[13]

    10. Advertisement

Enquire a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertisement

Video

  • Look for scratches along the surface if your rattan furniture is fabricated with a flat weave. If you spot any, warm up the surface with a hairdryer while rubbing abroad the blemishes with a cloth.[14]

  • Y'all can also repair broken rattan strands with epoxy resin. Simply knead and sculpt the resin along the broken department, and so it blends in with the rest of the material. And then, allow the resin cure for 2 days.[15]

Thanks for submitting a tip for review!

Advertisement

Things You'll Need

  • Bristle brush
  • Flathead screwdriver
  • Super glue
  • Detergent (optional)
  • Water (optional)
  • Toothbrush (optional)
  • Pliers or scissors
  • H2o
  • Basin
  • Super mucilage

About This Article

Thanks to all authors for creating a page that has been read 12,818 times.

Did this commodity help y'all?

Source: https://www.wikihow.com/Repair-Rattan-Garden-Furniture

0 Response to "How To Repair Woven Plastic Outdoor Furniture"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel